Show simple item record

dc.contributor.authorNicholas F. Morris
dc.date.accessioned2017-05-08T22:34:01Z
dc.date.available2017-05-08T22:34:01Z
dc.date.copyrightJuly 1990
dc.date.issued1990
dc.identifier.other%28asce%290733-9399%281990%29116%3A7%281580%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/82753
dc.description.abstractThis paper investigates the accuracy of a simplified model for the description of elastic‐plastic response of wide flange shapes under three‐dimensional loading. The model uses the average effect of moment‐axial force curvature equations in each bending direction to compute the terms in the element stiffness matrix. While this approach is exact for planar response computations, it is an approximation in describing three‐dimensional response. Another problem that arises for rolled shapes is that the model must describe the effect of differential bending on the member's response. This is accomplished by using the elastic stress variation to measure the extent of flange yielding. A large deflection, displacement‐control procedure is used to compute the elastic‐plastic‐failure load of the system and trace the unloading path. Comparison with analytical and experimental work on flexural‐torsional buckling of columns is used to verify the accuracy of the proposed model. Agreement with previously published results is excellent.
dc.publisherAmerican Society of Civil Engineers
dc.titleVerification of Simplified Inelastic Models of 3‐D Behavior
dc.typeJournal Paper
dc.journal.volume116
dc.journal.issue7
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1990)116:7(1580)
dc.treeJournal of Engineering Mechanics:;1990:;Volume ( 116 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record