Show simple item record

dc.contributor.authorB. M. Liaw
dc.contributor.authorF. L. Jeang
dc.contributor.authorN. M. Hawkins
dc.contributor.authorA. S. Kobayashi
dc.date.accessioned2017-05-08T22:33:59Z
dc.date.available2017-05-08T22:33:59Z
dc.date.copyrightJuly 1990
dc.date.issued1990
dc.identifier.other%28asce%290733-9399%281990%29116%3A7%281560%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/82742
dc.description.abstractA combined crack closure‐shear transfer model of the fracture‐process zone (FPZ) of concrete was developed through an interactive use of fracture‐test data and finite element analyses of crack‐line wedge‐loaded, double‐cantilever beam (CLWL‐DCB) specimens subjected to additional diagonal compression loading. The diagonal compression loading caused the crack to veer in the diagonal direction. The numerical simulation of those mixed‐mode‐fracture results showed that the load‐carrying capacity of the specimens was governed only by the crack‐closure stress on the FPZ, because the initial direction for the cracks coincided with the minimum principal stress direction and that direction remained essentially the same until the maximum wedge load was exceeded. The effect of shear‐transfer modeling was demonstrated by numerical simulation of published fracture‐test data for eccentrically loaded, four‐point‐bend specimens.
dc.publisherAmerican Society of Civil Engineers
dc.titleFracture‐Process Zone for Mixed‐Mode Loading of Concrete
dc.typeJournal Paper
dc.journal.volume116
dc.journal.issue7
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1990)116:7(1560)
dc.treeJournal of Engineering Mechanics:;1990:;Volume ( 116 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record