Show simple item record

dc.contributor.authorSarven Akcelyan
dc.contributor.authorDimitrios G. Lignos
dc.contributor.authorTsuyoshi Hikino
dc.contributor.authorMasayoshi Nakashima
dc.date.accessioned2017-05-08T22:33:55Z
dc.date.available2017-05-08T22:33:55Z
dc.date.copyrightJune 2016
dc.date.issued2016
dc.identifier.other49767414.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/82723
dc.description.abstractThis paper summarizes a number of key findings that affect the use of linear and nonlinear analysis procedures for the seismic evaluation of steel frame buildings with supplemental damping devices and in particular, buckling-restrained braces (BRBs) and nonlinear viscous dampers (NVDs). The assessment is based on a comparison of various engineering demand parameters (EDPs) with experimental data obtained from a series of full-scale shaking table tests of a five-story steel building equipped with BRBs and NVDs. It is shown that: (1) there is no clear advantage between three-dimensional (3D) and two-dimensional (2D) analyses in the prediction of the dynamic behavior of regular plan view steel frame buildings regardless of the damper type; (2) incorporating the brace and nonlinear viscous damper axial flexibility in the analytical model of the test structure with NVDs significantly improves the overall numerical predictions; and (3) the current effective damping ratio recommended by ASCE 41-13 as part of linear static procedures for the evaluation of frame buildings with BRBs or NVDs may not be conservative enough. A new performance-based design tool called performance-spectra (P-Spectra) is able to reliably predict the EDPs of interest. The P-Spectra tool is also able to validate the efficiency of various damper solutions on the dynamic performance of the test structure. It is demonstrated that P-Spectra can be employed to predict estimates of potential residual deformations that traditional linear and nonlinear static procedures cannot.
dc.publisherAmerican Society of Civil Engineers
dc.titleEvaluation of Simplified and State-of-the-Art Analysis Procedures for Steel Frame Buildings Equipped with Supplemental Damping Devices Based on E-Defense Full-Scale Shake Table Tests
dc.typeJournal Paper
dc.journal.volume142
dc.journal.issue6
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001474
dc.treeJournal of Structural Engineering:;2016:;Volume ( 142 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record