Show simple item record

dc.contributor.authorK. K. Ang
dc.contributor.authorC. M. Wang
dc.date.accessioned2017-05-08T22:33:19Z
dc.date.available2017-05-08T22:33:19Z
dc.date.copyrightJune 1990
dc.date.issued1990
dc.identifier.other%28asce%290733-9399%281990%29116%3A6%281220%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/82520
dc.description.abstractElastic flexural buckling formulas for columns under an end‐concentrated load and axial uniformly distributed load (or selfweight) found in the literature or newly derived by the writers, are summarized herein. However, these formulas overestimate the critical buckling loads when the columns are short or consist of struts connected by lacing bars or batten plates, since the effect of shearing force on their deflections becomes significant. This paper investigates the stability of such columns, with a high shear flexibility factor, under a general combined end‐concentrated load and axial distributed load. Stability criterion design curves, obtained from the finite element approach, are presented for a wide range of column end conditions. The influence of the shear flexibility factor on the critical loads is also examined. Moreover, some simple shear‐flexural buckling formulas for columns under combined end‐concentrated load and axial trapezoidal load are proposed.
dc.publisherAmerican Society of Civil Engineers
dc.titleShear‐Flexural Buckling of Columns
dc.typeJournal Paper
dc.journal.volume116
dc.journal.issue6
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1990)116:6(1220)
dc.treeJournal of Engineering Mechanics:;1990:;Volume ( 116 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record