Show simple item record

dc.contributor.authorJongkwan
dc.contributor.authorKim
dc.contributor.authorTadashi
dc.contributor.authorKawai
dc.contributor.authorMotoki
dc.contributor.authorKazama
dc.contributor.authorTomohiro
dc.contributor.authorMori
dc.date.accessioned2017-05-08T22:31:52Z
dc.date.available2017-05-08T22:31:52Z
dc.date.copyrightOctober 2016
dc.date.issued2016
dc.identifier.other48581859.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/82109
dc.description.abstractThis study examined the liquefaction-induced ground settlement of silty sand ground, in which many nonplastic fines are contained. Investigation determined that if fines were included in the specimen, the minimum void ratio shrank more under water-immersion than dry conditions. In addition, the cyclic minimum void ratio was examined, which was obtained by cyclic liquefaction and drainage testing conducted by assuming earthquake excitation. The results illustrated that the difference between the estimated dry and cyclic minimum void ratios uniquely correlated with fines content. A new density index, the normalized margin of void ratio, was proposed for postliquefaction volumetric strain based on examination of the minimum void ratio of soils containing nonplastic fines. The test results confirmed that maximum and accumulated shear strains are satisfactory indices of loading history. Furthermore, the normalized margin of void ratio performed well as a density index for estimating postliquefaction settlements, regardless of the type or content of fines.
dc.publisherAmerican Society of Civil Engineers
dc.titleDensity Index for Estimating the Postliquefaction Volumetric Strain of Silty Soils
dc.typeJournal Paper
dc.journal.volume16
dc.journal.issue5
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0000574
dc.treeInternational Journal of Geomechanics:;2016:;Volume ( 016 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record