Show simple item record

dc.contributor.authorLiang-Jiu Jia
dc.contributor.authorTsuyoshi Koyama
dc.contributor.authorHitoshi Kuwamura
dc.date.accessioned2017-05-08T22:31:51Z
dc.date.available2017-05-08T22:31:51Z
dc.date.copyrightJuly 2014
dc.date.issued2014
dc.identifier.other48564543.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/82101
dc.description.abstractPrevious studies have proposed a cyclic ductile fracture model by applying the void growth model and an established rule in incremental form, in which only a monotonic tensile coupon test is required to calibrate the parameters of the fracture model and the corresponding plasticity models. The model parameters were deduced from small-scale hourglass steel coupons, but not from large-scale specimens. In practice, however, ductile fracture after the occurrence of local buckling has been observed in steel members during recent huge earthquakes. This paper aims to establish a simulation method for the postbuckling cracking process on the basis of formerly proposed fracture and plasticity models. Experimental results demonstrate that the ultimate behaviors of heat-treated square hollow section (SHS) stub columns associated with plate buckling and ductile fracture under cyclic loading can be simulated with favorable accuracy.
dc.publisherAmerican Society of Civil Engineers
dc.titleExperimental and Numerical Study of Postbuckling Ductile Fracture of Heat-Treated SHS Stub Columns
dc.typeJournal Paper
dc.journal.volume140
dc.journal.issue7
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001056
dc.treeJournal of Structural Engineering:;2014:;Volume ( 140 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record