Show simple item record

dc.contributor.authorXuhong Zhou
dc.contributor.authorJiang Li
dc.contributor.authorJiepeng Liu
dc.date.accessioned2017-05-08T22:31:10Z
dc.date.available2017-05-08T22:31:10Z
dc.date.copyrightMay 2016
dc.date.issued2016
dc.identifier.other48195658.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/81944
dc.description.abstractVibration has become a serious serviceability problem due to the large openings of girder, lightweight floor systems, and high-strength materials used in practice. The results from both heel-drop and jumping floor vibration tests of a large-span prestressed cable RC truss (PCT) floor system are presented. System parameters such as peak acceleration, fundamental frequency, and damping ratios were considered and studied. The results and comparisons were taken based on the on-site test data. The comparison results indicate inconsistencies with the heel-drop or jumping impact models proposed by other researchers. The results from heel-drop and jumping tests were comprehensively compared against published codes. Based on the classic plate theory, a derived accurate formula for a PCT floor system is proposed. Lastly, a simplified method is suggested, which uses the constant moment of inertia for the cross section of a PCT girder.
dc.publisherAmerican Society of Civil Engineers
dc.titleVibration of Prestressed Cable RC Truss Floor System due to Human Activity
dc.typeJournal Paper
dc.journal.volume142
dc.journal.issue5
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001447
dc.treeJournal of Structural Engineering:;2016:;Volume ( 142 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record