Show simple item record

dc.contributor.authorXie‐Qing Xu
dc.contributor.authorXiao‐Xia Sun
dc.date.accessioned2017-05-08T22:30:51Z
dc.date.available2017-05-08T22:30:51Z
dc.date.copyrightFebruary 1990
dc.date.issued1990
dc.identifier.other%28asce%290733-9399%281990%29116%3A2%28390%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/81842
dc.description.abstractIn the conventional design of a spillway invert and flow bucket, circular, elliptic, and parabolic curves are generally used to connect straight boundaries. Because of the abrupt change in curvature at tangency points, considerable drop of pressure may occur, which sometimes causes cavitation damage. Two kinds of curves with gradually varied curvature, CGVC 1 and CGVC 2, are suggested in spillway design to connect two given points. The slope and the curvature at both ends are specified for a CGVC 1 curve. For a CGVC 2 curve, with other conditions the same as CGVC 1, the curvature at the downstream end is not prescribed. A variable domain finite element scheme, in which the location of the free surfaces of the jet is determined simultaneously with the stream function, is then briefly described. The proposed curves with gradually varied curvature are used in four sample designs. Computational results with the finite element scheme indicate that the new designs give better pressure distribution than the conventional one.
dc.publisherAmerican Society of Civil Engineers
dc.titleFlow in Spillways with Gradually Varied Curvature
dc.typeJournal Paper
dc.journal.volume116
dc.journal.issue2
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1990)116:2(390)
dc.treeJournal of Engineering Mechanics:;1990:;Volume ( 116 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record