Show simple item record

dc.contributor.authorRui Cheng
dc.contributor.authorLei Xu
dc.contributor.authorSheng Jin
dc.contributor.authorYu Shi
dc.date.accessioned2017-05-08T22:30:12Z
dc.date.available2017-05-08T22:30:12Z
dc.date.copyrightMarch 2016
dc.date.issued2016
dc.identifier.other47180772.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/81663
dc.description.abstractGusset plate connections with single-angle steel members are commonly used in power transmission towers. However, little research has been carried out with regard to the compressive behavior and design of gusset plates connected with single-angle members. Due to the complexity of the connections and load eccentricity, it is difficult to predict the compressive strength of the gusset plates. In this study, two full-scale experimental tests and a numerical parametric study were conducted to investigate the compressive behavior of such gusset plate connections. In the tests, the buckling failure mode and lateral-torsional deformation were observed. Finite-element (FE) models were then established and validated through comparison against the test results. In the parametric study, the effects of gusset plate thickness, unbraced length, distance to bending line, and load on the adjacent bracing member were examined. On the basis of the findings of this study and currently available design methods, two design methods were proposed for predicting the compressive strength of gusset plates connected with single-angle members. Good agreements were observed between the FE and design results in terms of the compressive strength and it was found that one method based on plate buckling gave a better prediction of the strength of gusset plates connected with single-angle members than the other based on effective column.
dc.publisherAmerican Society of Civil Engineers
dc.titleCompressive Behavior of Gusset Plates Connected with Single-Angle Members
dc.typeJournal Paper
dc.journal.volume142
dc.journal.issue3
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001446
dc.treeJournal of Structural Engineering:;2016:;Volume ( 142 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record