Show simple item record

dc.contributor.authorF. Molenkamp
dc.contributor.authorJ. M. M. van Deventer
dc.date.accessioned2017-05-08T22:30:01Z
dc.date.available2017-05-08T22:30:01Z
dc.date.copyrightDecember 1990
dc.date.issued1990
dc.identifier.other%28asce%290733-9399%281990%29116%3A12%282603%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/81608
dc.description.abstractThe stiffness of shallow foundations on homogeneous soil layers can be predicted by means of an in‐situ model test and a scaling rule. In this paper, the existing scaling rules are reviewed first. Then a scaling rule is developed on the basis of a constitutive model for frictional materials. The material behavior is categorized by two characteristic stiffnesses: deviatoric loading and isotropic compression. The parameter in the scaling rule can be determined on the basis of either a series of drained triaxial tests or a series of in‐situ‐plate‐loading tests. Both approaches are verified experimentally. The practical relevance of the scaling rule is illustrated by an example. For a scale factor of 10, the dependence of both characteristic stiffnesses on the magnitude of the isotropic stress can cause errors in the predicted settlement of a factor of two. For an accurate determination of the foundation stiffness at small load levels, a large‐diameter model plate is required, and special attention must be given to the contact between the plate and the soil.
dc.publisherAmerican Society of Civil Engineers
dc.titleScaling Rule for Stiffness of Foundations
dc.typeJournal Paper
dc.journal.volume116
dc.journal.issue12
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1990)116:12(2603)
dc.treeJournal of Engineering Mechanics:;1990:;Volume ( 116 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record