Show simple item record

dc.contributor.authorJ. Borzouie
dc.contributor.authorG. A. MacRae
dc.contributor.authorJ. G. Chase
dc.contributor.authorG. W. Rodgers
dc.contributor.authorG. C. Clifton
dc.date.accessioned2017-05-08T22:29:56Z
dc.date.available2017-05-08T22:29:56Z
dc.date.copyrightJanuary 2016
dc.date.issued2016
dc.identifier.other46956091.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/81585
dc.description.abstractThis paper describes experimental testing of an asymmetric friction connection (AFC) at the base of a steel column such as may be used in a moment-frame. Friction/sliding surfaces were parallel to the column-strong axis. In-plane, out-of-plane and 2D clover leaf–cyclic tests were conducted of columns both with and without applied axial force. Tests were conducted both with and without bolts passing through the plates to provide compression on the sliding/friction interface. It was found that this type of rocking base–friction connection can tolerate high levels of drift without significant strength degradation, although some stiffness degradation occurred, especially after the cycles in the weak-axis direction. A simple procedure proposed to estimate the moment resistance is verified. The friction-base connections, having similar cost to conventional connections and exhibiting low-damage performance, have the potential to become widely used in aseismic construction.
dc.publisherAmerican Society of Civil Engineers
dc.titleExperimental Studies on Cyclic Performance of Column Base Strong Axis–Aligned Asymmetric Friction Connections
dc.typeJournal Paper
dc.journal.volume142
dc.journal.issue1
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001327
dc.treeJournal of Structural Engineering:;2016:;Volume ( 142 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record