Show simple item record

dc.contributor.authorBipul
dc.contributor.authorHawlader
dc.contributor.authorAnup
dc.contributor.authorFouzder
dc.contributor.authorSujan
dc.contributor.authorDutta
dc.date.accessioned2017-05-08T22:29:54Z
dc.date.available2017-05-08T22:29:54Z
dc.date.copyrightFebruary 2016
dc.date.issued2016
dc.identifier.other46956084.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/81578
dc.description.abstractSteel catenary risers (SCR) are widely used in deepwater oil and gas production. The riser–seabed–water interaction near the touchdown zone is one of the main concerns in the design of fatigue life of SCR. During upward displacement, suction develops under the riser and a trench might be formed when it separates from the seabed near the touchdown point. In the subsequent downward movement, the riser penetrates through this trench to the seabed. Therefore, modeling of suction and trench formation is very important. In the existing models available in the literature for uplift resistance, these factors are incorporated using empirical relationships. It is also recognized that the available finite-element (FE) modeling techniques for this large-deformation problem are computationally very expensive, although penetration behavior can be simulated. In the present research program, both penetration and uplift behavior are simulated using FE and computational fluid dynamics (CFD) approaches. The simulation results for penetration are presented in Hawlader et al. (
dc.publisherAmerican Society of Civil Engineers
dc.titleNumerical Modeling of Suction and Trench Formation at the Touchdown Zone of Steel Catenary Riser
dc.typeJournal Paper
dc.journal.volume16
dc.journal.issue1
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0000497
dc.treeInternational Journal of Geomechanics:;2016:;Volume ( 016 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record