Show simple item record

dc.contributor.authorIgor Gavric
dc.contributor.authorMassimo Fragiacomo
dc.contributor.authorArio Ceccotti
dc.date.accessioned2017-05-08T22:29:13Z
dc.date.available2017-05-08T22:29:13Z
dc.date.copyrightNovember 2015
dc.date.issued2015
dc.identifier.other46522003.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/81406
dc.description.abstractAn experimental program was performed at IVALSA Trees and Timber Institute on single and coupled cross-laminated (CLT) wall panels with different anchoring systems and different types of joints between adjacent panels. The mechanical properties of CLT walls were assessed and are critically discussed in the paper. The connector layout and the design of the screwed vertical joints were found to markedly affect the overall behavior of the structural system. The in-plane deformations of CLT panels were almost negligible, whereas concentration of forces and deformations mainly occurred in the connections. Advanced analytical models for nonlinear pushover analysis of CLT wall systems were developed and verified against test results. The models take into account all stiffness and strength components of connectors, as well as the bending and shear deformation of the panels. A parametric study of CLT wall systems with different aspect ratios and wall segmentation was performed, showing that segmentation of CLT walls decreases their stiffness and strength but significantly improves their deformation capacity.
dc.publisherAmerican Society of Civil Engineers
dc.titleCyclic Behavior of CLT Wall Systems: Experimental Tests and Analytical Prediction Models
dc.typeJournal Paper
dc.journal.volume141
dc.journal.issue11
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001246
dc.treeJournal of Structural Engineering:;2015:;Volume ( 141 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record