Show simple item record

dc.contributor.authorMikiya Okumura
dc.contributor.authorNorio Hasebe
dc.contributor.authorTakuji Nakamura
dc.date.accessioned2017-05-08T22:28:48Z
dc.date.available2017-05-08T22:28:48Z
dc.date.copyrightOctober 1990
dc.date.issued1990
dc.identifier.other%28asce%290733-9399%281990%29116%3A10%282173%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/81287
dc.description.abstractA solution is found for a cracked half‐plane loaded by a wedge‐shaped rigid punch with friction. It is assumed that Coulomb's friction law is applied between the punch and the matrix and that the contact region is straight. Since the punch ends are sharp corners, stresses become singular and a crack begins from the punch end. An analytical solution is obtained by means of a rational mapping function and complex stress functions. Stress distributions, stress‐intensity factors, and resultant moments are shown for various angles of the wedge‐shaped punch. The conditions for crack initiation are also investigated for the various combinations of coefficient of friction, loading, and angle. When a flat‐ended punch is subjected to rotation, the stress‐intensity factor of the opening mode vanishes for a certain frictional coefficient
dc.publisherAmerican Society of Civil Engineers
dc.titleCrack due to Wedge‐Shaped Punch with Friction
dc.typeJournal Paper
dc.journal.volume116
dc.journal.issue10
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1990)116:10(2173)
dc.treeJournal of Engineering Mechanics:;1990:;Volume ( 116 ):;issue: 010
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record