Show simple item record

dc.contributor.authorBin Cheng
dc.contributor.authorJianlei Wang
dc.contributor.authorPeng Shi
dc.date.accessioned2017-05-08T22:28:23Z
dc.date.available2017-05-08T22:28:23Z
dc.date.copyrightDecember 2015
dc.date.issued2015
dc.identifier.other46109301.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/81177
dc.description.abstractThis research focuses on the strengthening methods used for improving the compression behaviors of plates perforated by slotted holes, as provided in steel bridge pylons for the purposes of access and service. The rectangular plates that were investigated each have a centric slotted hole and are simply supported on four edges in the out-of-plane direction. Three types of strengthening stiffeners, ringed stiffener (RS), flat stiffener (FS), and longitudinal stiffener (LS), are considered. Uniaxial compression tests are first conducted for 41 specimens, of which seven are unstrengthened plates and 34 are strengthened plates. Stress concentrations, failure patterns, and elasto-plastic ultimate strengths are experimentally investigated. Finite element models are further developed to predict the ultimate strengths of plates with various dimensions. The FE results are validated by the test data. The influences of nondimensional parameters including plate aspect ratio, stiffener slenderness ratio, and stiffener thickness on ultimate strengths are revealed on the basis of numerous parametric studies. Comparisons in strengthening efficiencies of stiffeners are also made by considering stiffener weight. The simplified formulations used for predicting the compression strengths of strengthened plates are proposed. The net cross-sectional area–based strength, including stiffeners, is also recommended for the strength approximation in engineering applications.
dc.publisherAmerican Society of Civil Engineers
dc.titleImproving the Compression Behaviors of Perforated Plates with Slotted Holes Using Strengthening Stiffeners
dc.typeJournal Paper
dc.journal.volume141
dc.journal.issue12
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001276
dc.treeJournal of Structural Engineering:;2015:;Volume ( 141 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record