Show simple item record

dc.contributor.authorN. Purushothaman
dc.contributor.authorIan D. Moore
dc.date.accessioned2017-05-08T22:28:15Z
dc.date.available2017-05-08T22:28:15Z
dc.date.copyrightJanuary 1990
dc.date.issued1990
dc.identifier.other%28asce%290733-9399%281990%29116%3A1%28217%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/81141
dc.description.abstractA viscoelastic finite element contact analysis that predicts the hysteretic friction between a sliding rubber block and equally spaced triangular asperities is briefly described. Comparison of analytical results with experimentally measured friction values shows that the finite element analysis can be successfully applied to contact problems. The analysis is used to study the influence of sliding speed, contact pressure, and asperity geometry on hysteresis friction. Results show that the pressure dependence of friction is influenced by the amount of contact of rubber with the asperity. The coefficient of hysteresis friction increases with increasing speed to a maximum value and then decreases with further increase in speed. The coefficient of friction very much depends on the geometry of the asperity. Finally, the application of this procedure to study the road/tire interaction problems is discussed.
dc.publisherAmerican Society of Civil Engineers
dc.titleHysteresis Sliding Friction of Rubber—Finite Element Analysis
dc.typeJournal Paper
dc.journal.volume116
dc.journal.issue1
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1990)116:1(217)
dc.treeJournal of Engineering Mechanics:;1990:;Volume ( 116 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record