Show simple item record

dc.contributor.authorPranshoo
dc.contributor.authorSolanki
dc.contributor.authorMusharraf
dc.contributor.authorZaman
dc.contributor.authorDavid
dc.contributor.authorAdje
dc.contributor.authorZahid
dc.contributor.authorHossain
dc.date.accessioned2017-05-08T22:27:34Z
dc.date.available2017-05-08T22:27:34Z
dc.date.copyrightOctober 2015
dc.date.issued2015
dc.identifier.other45766149.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/80957
dc.description.abstractThis study explored the thermal cracking resistance of hot-mix asphalt (HMA) mixes containing recycled asphalt pavement (RAP). One RAP source was used to design two types of Superpave mixes, namely, Oklahoma S3 base and Oklahoma S4 surface course. Four mixes containing different percentages of RAP, namely, 25 and 40% RAP for S3 base courses and 0 and 10% RAP for S4 surface courses, were designed and tested. It was found that at lower temperatures, the mix containing a lower RAP content was stiffer, as indicated by higher creep compliance and indirect tensile strength values. At higher temperatures, however, the mix containing a higher content of RAP was also stiffer. Furthermore, the measured creep compliance values were compared with current predicted compliance values. The influence of RAP content on thermal cracking resistance was also evaluated through thermal stress analysis within the mechanistic framework.
dc.publisherAmerican Society of Civil Engineers
dc.titleEffect of Recycled Asphalt Pavement on Thermal Cracking Resistance of Hot-Mix Asphalt
dc.typeJournal Paper
dc.journal.volume15
dc.journal.issue5
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0000398
dc.treeInternational Journal of Geomechanics:;2015:;Volume ( 015 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail
This item appears in the following Collection(s)

Show simple item record