Show simple item record

dc.contributor.authorS. Szumko
dc.date.accessioned2017-05-08T22:27:10Z
dc.date.available2017-05-08T22:27:10Z
dc.date.copyrightSeptember 1989
dc.date.issued1989
dc.identifier.other%28asce%290733-9399%281989%29115%3A9%281851%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/80853
dc.description.abstractCertain aspects of modeling of the oscillating water column (OWC) wave‐power device are examined, with particular reference to its behavior at representative off‐resonant frequencies. Although comparison is made with a particular study incorporating the use of compressible flow equations for the air column, this work uses a simple mechanical analog that dispenses with the thermodynamic equations and arrives at similar results. Bearing in mind that the compressible flow study was based on quadratic damping and this one is based on linear damping, the differences when the two results are compared on an energy basis are remarkably small. The compression is made possible by the calculation of an equivalent linear damping coefficient, for the model developed here, from the quadratic damping used elsewhere. The details of the conversion are also provided. For certain studies, it is therefore proposed that the mechanical analog may be used to simplify programming and facilitate evaluation.
dc.publisherAmerican Society of Civil Engineers
dc.titleMechanical Model for Oscillating Water Column with Compressibility
dc.typeJournal Paper
dc.journal.volume115
dc.journal.issue9
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1989)115:9(1851)
dc.treeJournal of Engineering Mechanics:;1989:;Volume ( 115 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record