Show simple item record

dc.contributor.authorSung Chul Chun
dc.contributor.authorTaehun Ha
dc.date.accessioned2017-05-08T22:27:10Z
dc.date.available2017-05-08T22:27:10Z
dc.date.copyrightFebruary 2015
dc.date.issued2015
dc.identifier.other45478280.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/80851
dc.description.abstractIn the construction of reinforced concrete structures, bent reinforcing bars (rebars) are manually straightened to connect wall-slab joints in tall buildings, retaining wall-slab joints, and temporary openings, among other uses. Plastic deformation is unavoidable in the cold bending and straightening of rebars, and the work-hardening effect, the aging-hardening effect, and the Bauschinger effect weaken the rebars. Mechanical splices offer an alternative to the bending and straightening of rebars. In this study, tensile tests were conducted on cold-bent and straightened rebars to identify the resulting changes in yield strength, modulus of elasticity, tensile strength, and ductility. Cyclic loading tests were subsequently conducted on wall-slab joints to compare the structural performance of joints with mechanical splices with that of joints constructed with cold-straightened rebars. The test results indicate that the joints with mechanical splices exhibited typical flexural behavior and were equivalent in capacity to monolithic joints. In contrast, the joints with cold-straightened rebars developed a greater amount of bond cracks in the surface and spalling of the side cover concrete of the slab; these joints consequently displayed less strength and deformation capacity and lost stiffness more rapidly than did the joints with straight rebars. This phenomenon was apparent for joints with larger diameters and for higher-grade rebars. Therefore, joints with cold-straightened rebars should be used with caution in design and construction.
dc.publisherAmerican Society of Civil Engineers
dc.titleCyclic Behavior of Wall-Slab Joints with Lap Splices of Cold-Straightened Rebars and Mechanical Splices
dc.typeJournal Paper
dc.journal.volume141
dc.journal.issue2
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001064
dc.treeJournal of Structural Engineering:;2015:;Volume ( 141 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record