Show simple item record

dc.contributor.authorJian-Guo Nie
dc.contributor.authorRan Ding
dc.contributor.authorJian-Sheng Fan
dc.contributor.authorMu-Xuan Tao
dc.date.accessioned2017-05-08T22:26:43Z
dc.date.available2017-05-08T22:26:43Z
dc.date.copyrightDecember 2014
dc.date.issued2014
dc.identifier.other45233070.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/80741
dc.description.abstractThis paper presents finite-element analysis (FEA) and experimental study on the seismic behavior of joints between steel K-style outrigger truss and concrete core in tall buildings. Two new joint types with different details, including the joints with outside steel plates and encased steel plates, were conceived and intensively compared. Elaborate FEA models of the joints were developed, and a preliminary finite-element study was first conducted to evaluate the failure modes and hysteretic behavior of the joints to support the preparation of the laboratory test program. Then two specimens with different joint details were tested under cyclic loads. Several indexes that could reflect the seismic performance of the joints, such as the strength degradation, the rigidity degradation, the ductility, and the energy dissipation capacity, were analyzed. The mechanism of the joints was also revealed based on the stress distributions obtained by further FEA and test results, and a simplified FEA model was finally proposed for a more general purpose in routine design practice, and could provide a powerful tool for future research in design methods of the joints. The FEA and experimental results indicated that the joints exhibited favorable seismic performance which could transfer the loads reliably, and the joint with outside steel plates was better than that with encased steel plates, with more construction convenience, higher buckling load, and less concrete cracks.
dc.publisherAmerican Society of Civil Engineers
dc.titleSeismic Performance of Joints between Steel K-Style Outrigger Trusses and Concrete Cores in Tall Buildings
dc.typeJournal Paper
dc.journal.volume140
dc.journal.issue12
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001028
dc.treeJournal of Structural Engineering:;2014:;Volume ( 140 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record