Show simple item record

dc.contributor.authorEslam M. Soliman
dc.contributor.authorUsama F. Kandil
dc.contributor.authorMahmoud M. Reda Taha
dc.date.accessioned2017-05-08T22:26:37Z
dc.date.available2017-05-08T22:26:37Z
dc.date.copyrightApril 2015
dc.date.issued2015
dc.identifier.other45178213.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/80720
dc.description.abstractIn many situations, it is necessary to splice multiple layers of fiber-reinforced polymer (FRP) composite laminates. The relatively low bond and shear strength of FRP layers usually necessitates long lap splices. In this paper, the authors demonstrate how lap splices shorter than those used in standard FRP design today can be made viable by incorporating carbon nanotubes in the epoxy resin. Experimental and numerical investigations are conducted to evaluate the significance of using multiwalled carbon nanotubes (MWCNTs) on FRP lap splice. Double lap shear joints of carbon-fiber-reinforced polymer (CFRP) were fabricated and tested with various amounts of functionalized MWCNTs (0.5, 1.0, and 1.5%). Experiments show that the shear stress-strain response of the CFRP lap splice can be engineered with the appropriate amount of MWCNTs to increase the bond strength by 50% and/or the failure strain by 300%. The numerical modeling shows that the shear-slip at the interface governs the bond strength and ductility of the lap joints.
dc.publisherAmerican Society of Civil Engineers
dc.titleInvestigation of FRP Lap Splice Using Epoxy Containing Carbon Nanotubes
dc.typeJournal Paper
dc.journal.volume19
dc.journal.issue2
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)CC.1943-5614.0000504
dc.treeJournal of Composites for Construction:;2015:;Volume ( 019 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record