Show simple item record

dc.contributor.authorHong-Gun Park
dc.contributor.authorHo-Jun Lee
dc.contributor.authorIn-Rak Choi
dc.contributor.authorSung-Bae Kim
dc.contributor.authorSung-Soon Park
dc.date.accessioned2017-05-08T22:25:21Z
dc.date.available2017-05-08T22:25:21Z
dc.date.copyrightDecember 2015
dc.date.issued2015
dc.identifier.other44371564.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/80337
dc.description.abstractAn experimental study was performed to investigate the axial-flexural load-carrying capacity of concrete-filled steel tube columns encased with thin precast concrete (PC). Six eccentrically loaded columns and one concentrically loaded column were tested. To prevent the premature failure of the concrete encasement, various reinforcement details such as studs, steel fiber, welded wire mesh, and cross ties were used. The maximum axial loads of the specimens agreed with the strengths predicted by current design codes, although in some specimens, the load-carrying capacity decreased immediately after the peak strength owing to early spalling of the concrete encasement. On the basis of the test results, the use of fiber-reinforced concrete is recommended to increase the ductility of columns by restraining the spalling of the concrete encasement.
dc.publisherAmerican Society of Civil Engineers
dc.titleConcrete-Filled Steel Tube Columns Encased with Thin Precast Concrete
dc.typeJournal Paper
dc.journal.volume141
dc.journal.issue12
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001303
dc.treeJournal of Structural Engineering:;2015:;Volume ( 141 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record