Show simple item record

dc.contributor.authorYan Xiao
dc.contributor.authorArmen Martirossyan
dc.date.accessioned2017-05-08T22:25:00Z
dc.date.available2017-05-08T22:25:00Z
dc.date.copyrightMarch 1998
dc.date.issued1998
dc.identifier.other44312222.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/80235
dc.description.abstractThis paper presents the experimental results of six scaled high-strength concrete columns with concrete compressive strengths of 76–86 MPa. Primary experimental parameters include axial loads ranging from 10 to 20% of column axial load-carrying capacity based on concrete gross section; longitudinal steel ratios of 2.46 to 3.53% of the gross sectional area; and volumetric ratios of transverse reinforcement ranging from 1.63 to 3.67%. Model columns with transverse reinforcement designed following the seismic provisions of current code developed sufficient ductility, with displacement ductility factors equal to or exceeding 6.0. The model columns designed with 50% of the transverse reinforcement required by current code also developed sufficient ductility when the axial load was 10% of its axial load-carrying capacity. Lateral load-carrying capacities of all the columns exceeded the flexural capacities calculated based on the equivalent concrete stress block used in current design code. Seismic shear strength of high-strength concrete columns was also examined, based on the test results and analytical approaches.
dc.publisherAmerican Society of Civil Engineers
dc.titleSeismic Performance of High-Strength Concrete Columns
dc.typeJournal Paper
dc.journal.volume124
dc.journal.issue3
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)0733-9445(1998)124:3(241)
dc.treeJournal of Structural Engineering:;1998:;Volume ( 124 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record