Show simple item record

dc.contributor.authorSaminu Raghu De Silva Chandrakeerthy
dc.date.accessioned2017-05-08T22:24:33Z
dc.date.available2017-05-08T22:24:33Z
dc.date.copyrightMarch 1991
dc.date.issued1991
dc.identifier.other44252543.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/79980
dc.description.abstractConsiderable use of blocks has made it necessary to draft a Sri Lankan standard on cement blocks. For the determination of compressive strength of blocks, several internationally used methods are available. Because the blocks used are of low strength, usefulness of these methods was uncertain. This led to the formulation of a suitable test method and comparison of its performance with that of methods used widely in other countries, and some variations based on them. The study considered four test methods and the influence of the variables, height‐breadth ratio, and mix proportions on the compressive strength values given by those test methods. The tests were designed to determine the reproducibility and repeatability of each test method, as well as to facilitate statistical analysis. The test method recommended the adoption of one part cement to one part sand capping with plywood packings.
dc.publisherAmerican Society of Civil Engineers
dc.titleCompressive Strength Test for Low‐Strength Cement Blocks
dc.typeJournal Paper
dc.journal.volume117
dc.journal.issue3
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)0733-9445(1991)117:3(883)
dc.treeJournal of Structural Engineering:;1991:;Volume ( 117 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record