Show simple item record

dc.contributor.authorMichael J. Dowling
dc.contributor.authorJohn F. Hall
dc.date.accessioned2017-05-08T22:24:28Z
dc.date.available2017-05-08T22:24:28Z
dc.date.copyrightApril 1989
dc.date.issued1989
dc.identifier.other%28asce%290733-9399%281989%29115%3A4%28768%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/79930
dc.description.abstractA nonlinear finite element procedure for arch dams is described in which the gradual opening and closing of vertical contraction joints and predetermined horizontal cracking planes are considered. A special joint element approximately represents the deformations due to plane sections not remaining plane at each open joint and allows a single shell element discretization in the thickness direction to be used for the dam. Compressive and sliding nonlinearities are not included. Finite element treatments are also used for the water, assumed incompressible, and for the foundation rock, assumed massless, with all degrees of freedom (dof) off the dam condensed out. For efficiency in the computations, the condensed water and foundation matrices are localized in a way which maintains good accuracy. The response of Pacoima Dam to the 1971 San Fernando ground motion recorded on a ridge over one abutment and scaled by two.‐thirds is computed first for water at the intermediate level that existed during the 1971 earthquake and then for full reservoir. In the first analysis, the dam exhibits pronounced opening and separation of the contraction joints, allowing violation of the no‐slip assumption. The presence of a full reservoir greatly increases the dam response, enough to bring some of the other assumptions of the analysis into question. Reducing the ground motion scale to 0.44 with full reservoir drops the response back to a reasonable level, but the contraction joint separations remain.
dc.publisherAmerican Society of Civil Engineers
dc.titleNonlinear Seismic Analysis of Arch Dams
dc.typeJournal Paper
dc.journal.volume115
dc.journal.issue4
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1989)115:4(768)
dc.treeJournal of Engineering Mechanics:;1989:;Volume ( 115 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record