Show simple item record

dc.contributor.authorZdeněk P. Bažant
dc.contributor.authorGilles Pijaudier‐Cabot
dc.date.accessioned2017-05-08T22:24:27Z
dc.date.available2017-05-08T22:24:27Z
dc.date.copyrightApril 1989
dc.date.issued1989
dc.identifier.other%28asce%290733-9399%281989%29115%3A4%28755%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/79919
dc.description.abstractThe characteristic length of a heterogeneous brittle material such as concrete represents a material property that governs the minimum possible width of a zone of strain‐softening damage in nonlocal continuum formulations or the minimum possible spacing of cracks in discrete fracture models. This length is determined experimentally. The basic idea is to compare the response of two types of specimens, one in which the tensile softening damage remains distributed and one in which it localizes. The latter type of specimen is an edge‐notched tensile fracture specimen, and the former type of specimen is of the same shape but without notches. Localization of softening damage is prevented by gluing to the specimen surface a layer of parallel thin‐steel rods and using a cross section of a minimum possible thickness that can be cast with a given aggregate. The characteristic length
dc.publisherAmerican Society of Civil Engineers
dc.titleMeasurement of Characteristic Length of Nonlocal Continuum
dc.typeJournal Paper
dc.journal.volume115
dc.journal.issue4
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1989)115:4(755)
dc.treeJournal of Engineering Mechanics:;1989:;Volume ( 115 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record