Show simple item record

dc.contributor.authorAlaa E. Elwi
dc.contributor.authorTerry M. Hrudey
dc.date.accessioned2017-05-08T22:24:26Z
dc.date.available2017-05-08T22:24:26Z
dc.date.copyrightApril 1989
dc.date.issued1989
dc.identifier.other%28asce%290733-9399%281989%29115%3A4%28740%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/79908
dc.description.abstractThe geometric relations required for an embedded finite element representation of generally curved reinforcing bars or prestressing tendons are developed. For practical reasons, the reinforcing layers are described in global coordinates, independently of the finite element mesh. An inverse mapping procedure is developed to transform global coordinates of points on the reinforcement layer into local natural coordinates in the parent element. The strain field in the layer is discussed, including a bond slip model. The principle of virtual work is used to derive the various element matrices. The procedure is successfully tested, using both regular and irregular meshes, on three test problems: a uniform strain field, and two versions of a quarter ring under external pressure.
dc.publisherAmerican Society of Civil Engineers
dc.titleFinite Element Model for Curved Embedded Reinforcement
dc.typeJournal Paper
dc.journal.volume115
dc.journal.issue4
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1989)115:4(740)
dc.treeJournal of Engineering Mechanics:;1989:;Volume ( 115 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record