Show simple item record

dc.contributor.authorYi-Wei Lin
dc.contributor.authorDavid Biggs
dc.contributor.authorLiam Wotherspoon
dc.contributor.authorJason M. Ingham
dc.date.accessioned2017-05-08T22:23:31Z
dc.date.available2017-05-08T22:23:31Z
dc.date.copyrightNovember 2014
dc.date.issued2014
dc.identifier.other43911276.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/79446
dc.description.abstractAn experimental program was conducted to investigate the viability of using engineered cementitious composite (ECC) shotcrete as in-plane shear reinforcement for concrete masonry wallettes. Twenty-six mortared or dry-stacked ungrouted and unreinforced concrete masonry wallettes were strengthened through the application of an ECC shotcrete mix, applied either by spraying with a shotcrete machine or by hand trowelling. To determine the effect of applicator experience, ECC was applied by both a professional plasterer and amateur plasterers, with and without supervision. The in-plane shear strength of the strengthened wallettes increased between 340 and 3,471%, depending on the ECC application method. The variability of the strength increase was smaller for wallettes that had mortared joints and an ECC overlay trowelled by a professional plasterer. A set of design equations was also developed to determine the shear strength of a strengthened wallette. The design displacement ductility can be conservatively set equal to 1.9 because of the high variability in the experimentally obtained ductility values.
dc.publisherAmerican Society of Civil Engineers
dc.titleIn-Plane Strengthening of Unreinforced Concrete Masonry Wallettes Using ECC Shotcrete
dc.typeJournal Paper
dc.journal.volume140
dc.journal.issue11
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001004
dc.treeJournal of Structural Engineering:;2014:;Volume ( 140 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record