Show simple item record

dc.contributor.authorYu
dc.contributor.authorZhou
dc.contributor.authorGuoliang
dc.contributor.authorDai
dc.date.accessioned2017-05-08T22:23:02Z
dc.date.available2017-05-08T22:23:02Z
dc.date.copyrightFebruary 2016
dc.date.issued2016
dc.identifier.other43850015.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/79197
dc.description.abstractA comprehensive strut-and-tie model is a function of the nodes, struts, ties, model types, and pile reaction force. Because each element has more than one solution, the function is a problem of permutations and combinations. This paper presents a new strut-and-tie model that yields a satisfactory simulation result. In the model, a model type of truss action, direct arch action, or a combination of both actions was selected independently for the side and angle piles. The node and tie parameters were also modified. The pile reaction force distribution and the failure mechanism for inclined struts were also considered. However, because the authors’ previous study did not include a detailed analysis or an in-depth exploration, the effect of these critical factors is discussed in this paper at length. The model, which was programmed using the
dc.publisherAmerican Society of Civil Engineers
dc.titleParameter Study of a New Strut-and-Tie Model for a Thick Cap with Six Piles
dc.typeJournal Paper
dc.journal.volume16
dc.journal.issue1
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0000515
dc.treeInternational Journal of Geomechanics:;2016:;Volume ( 016 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record