Show simple item record

dc.contributor.authorJin‐Guang Teng
dc.date.accessioned2017-05-08T22:21:16Z
dc.date.available2017-05-08T22:21:16Z
dc.date.copyrightSeptember 1994
dc.date.issued1994
dc.identifier.other43035810.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/78504
dc.description.abstractThis paper presents a detailed finite‐element investigation into the axisymmetric failure behavior and strength of intersections of the large end of a cone and a cylinder subject to uniform internal pressure. The study considers shells of uniform thickness with cone‐apex half angles ranging from 10° to 85° and cylinder radius‐to‐thickness ratios from 10 to 1,000. Plastic limit loads from a small‐deflection elastic‐plastic analysis are first presented. A rationally based simple equation is then established, which approximates the finite‐element limit loads very closely and is suitable for future incorporation in pressure‐vessel design codes. The effect of large deflections on the load‐deflection behavior is examined extensively for the covered geometric parameters for three different yield stresses. An approximate equation to assess the beneficial effect of large deflections on failure strength is also developed.
dc.publisherAmerican Society of Civil Engineers
dc.titleCone‐Cylinder Intersection under Pressure: Axisymmetric Failure
dc.typeJournal Paper
dc.journal.volume120
dc.journal.issue9
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1994)120:9(1896)
dc.treeJournal of Engineering Mechanics:;1994:;Volume ( 120 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record