Show simple item record

dc.contributor.authorMahen Mahendran
dc.contributor.authorCostin Moor
dc.date.accessioned2017-05-08T22:21:12Z
dc.date.available2017-05-08T22:21:12Z
dc.date.copyrightAugust 1999
dc.date.issued1999
dc.identifier.other42896052.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/78474
dc.description.abstractThe realistic strength and deflection behavior of industrial and commercial steel portal frame buildings are understood only if the effects of rigidity of end frames and profiled steel claddings are included. The conventional designs ignore these effects and are very much based on idealized two-dimensional (2D) frame behavior. Full-scale tests of a 12 × 12 m steel portal frame building under a range of design load cases indicated that the observed deflections and bending moments in the portal frame were considerably different from those obtained from a 2D analysis of frames ignoring these effects. Three-dimensional (3D) analyses of the same building, including the effects of end frames and cladding, were carried out, and the results agreed well with full-scale test results. Results clearly indicated the need for such an analysis and for testing to study the true behavior of steel portal frame buildings. It is expected that such a 3D analysis will lead to lighter steel frames as the maximum moments and deflections are reduced.
dc.publisherAmerican Society of Civil Engineers
dc.titleThree-Dimensional Modeling of Steel Portal Frame Buildings
dc.typeJournal Paper
dc.journal.volume125
dc.journal.issue8
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)0733-9445(1999)125:8(870)
dc.treeJournal of Structural Engineering:;1999:;Volume ( 125 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record