Response of MDOF Systems to Multiple Support Seismic Excitation
Abstract
The response of general multiple‐degrees‐of‐freedom (MDOF) systems subjected to several components of earthquake at multiple support points is obtained using a random‐vibration formulation. The excitation is modeled as a colored, correlated, vector‐valued, nonstationary random process. A new filter is used, such that the excitation may have multiple predominant frequencies and a wide range of spectral shapes. The time history of the RMS excitation at support points which is the output of the filter is prescribed directly. The corresponding input of the filter, a fictitious piecewise linear strength envelope, is generated accordingly before engaging the filter with the system. This filter also allows the support motion to be prescribed in terms of displacement, velocity, or acceleration, which is not true for other filters that are popular and widely in use. Finally, the correlation between any two components can also be prescribed as a function of time. The concept of “pseudo‐static displacement” used by other investigators is not used here. Instead the governing equation of motion is expressed in terms of absolute displacement along nodal DOF, and a new filter is used that is capable of producing finite RMS values of output and its two successive derivatives. Exact analytical expressions are derived for the evolutionary mean and covariance matrices of a modal system augmented by filters. The RMS time history of any desired response is then obtained using modal superposition. Finally, a two‐DOF system excited at two support points is analyzed to demonstrate the capability and simplicity of this formulation.