Show simple item record

dc.contributor.authorA. H.
dc.contributor.authorPadade
dc.contributor.authorJ. N.
dc.contributor.authorMandal
dc.date.accessioned2017-05-08T22:20:07Z
dc.date.available2017-05-08T22:20:07Z
dc.date.copyrightDecember 2014
dc.date.issued2014
dc.identifier.other41968953.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/78003
dc.description.abstractThis paper reports the engineering behavior of proposed expanded polystyrene-based geomaterial (EPGM) with fly ash through a laboratory experimental study. The proposed geomaterial is prepared by blending fly ash with expanded polystyrene (EPS) beads and a binder such as cement. The effects of different compositions and different mix ratios between EPS beads and fly ash (0.5–2.5%), cement and fly ash (10–20%), and water and fly ash (50 and 60%) on density, compressive strength, and initial tangent modulus of the geomaterial formed are studied. The authors observe that the density of EPGM can be effectively controlled by the quantity of EPS beads added in making the material. With the inclusion of merely 0.5–2.5% of EPS beads to fly ash (by weight), the density of the geomaterial formed can be reduced from
dc.publisherAmerican Society of Civil Engineers
dc.titleExpanded Polystyrene-Based Geomaterial with Fly Ash
dc.typeJournal Paper
dc.journal.volume14
dc.journal.issue6
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0000390
dc.treeInternational Journal of Geomechanics:;2014:;Volume ( 014 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record