Show simple item record

dc.contributor.authorPhilip Avery
dc.contributor.authorMahen Mahendran
dc.date.accessioned2017-05-08T22:20:02Z
dc.date.available2017-05-08T22:20:02Z
dc.date.copyrightSeptember 1997
dc.date.issued1997
dc.identifier.other41927793.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/77946
dc.description.abstractA new cold-formed and resistance-welded section known as the hollow flange beam (HFB) has been developed recently in Australia. In contrast to the common lateral-torsional buckling mode of I-beams, this unique section comprising two stiff triangular flanges and a slender web is susceptible to a lateral-distortional buckling mode of failure involving lateral deflection, twist, and cross-section change due to web distortion. This lateral-distortional buckling behavior has been shown to cause significant reduction of the available flexural capacity of HFBs. An investigation using finite-element analyses and large-scale experiments was carried out into the use of transverse web plate stiffeners to improve the lateral buckling capacity of HFBs. This paper presents the details of the finite-element model and analytical results. The experimental procedure and results are outlined in a companion paper.
dc.publisherAmerican Society of Civil Engineers
dc.titleFinite-Element Analysis of Hollow Flange Beams with Web Stiffeners
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue9
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)0733-9445(1997)123:9(1123)
dc.treeJournal of Structural Engineering:;1997:;Volume ( 123 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record