Show simple item record

dc.contributor.authorMuhammad Shazzad
dc.contributor.authorHossain
dc.contributor.authorAndy
dc.contributor.authorFourie
dc.contributor.authorBryan Poon
dc.contributor.authorYi-Wen
dc.date.accessioned2017-05-08T22:19:49Z
dc.date.available2017-05-08T22:19:49Z
dc.date.copyrightJune 2015
dc.date.issued2015
dc.identifier.other41216572.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/77831
dc.description.abstractThis paper reports results from centrifuge model tests that provide insight into the behavior of rectangular foundations (representing earthmoving equipment) during penetration, with freedom in rotation, adjacent to a sand embankment (cover layer), into a weaker clay layer (representing mine tailings). A parametric study was used to explore the relevant range of the setback ratio, slope height ratio, normalized clay strength and its nonhomogeneity, and foundation base geometry. The effect of these nondimensional parameters on the penetration resistance profile is discussed in the context of the likelihood and severity of failure. The failure of a flat-based rectangular foundation was less severe than that associated with a strip foundation, and the corresponding measures reduced with the increasing setback ratio (
dc.publisherAmerican Society of Civil Engineers
dc.titleRectangular Foundations on a Sand Embankment over Mine Tailings
dc.typeJournal Paper
dc.journal.volume15
dc.journal.issue3
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0000401
dc.treeInternational Journal of Geomechanics:;2015:;Volume ( 015 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record