Show simple item record

dc.contributor.authorMei-Ni Su
dc.contributor.authorBen Young
dc.contributor.authorLeroy Gardner
dc.date.accessioned2017-05-08T22:18:59Z
dc.date.available2017-05-08T22:18:59Z
dc.date.copyrightSeptember 2014
dc.date.issued2014
dc.identifier.other40634410.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/77367
dc.description.abstractAluminum alloys are used in a wide range of engineering applications and are gaining increasing usage in the construction sector, offering high strength-to-weight ratios and good durability. In this paper, a series of stub-column tests on aluminum alloy box sections with and without internal cross stiffeners is carried out to investigate cross-section capacity and to explore the possible exploitation of strain hardening in design. All existing stub-column test results from the literature were also collected. A database containing the results from 346 tests on aluminum alloy stub columns of box, channel, and angle sections, with a wide range of cross-section slendernesses, was formed. The test strengths were compared with the design strengths predicted by the current American, Australian/New Zealand, and European specifications. Furthermore, the test strengths were compared with those predicted by the deformation-based continuous strength method (CSM). Following reliability analyses, the design strengths predicted by the three current design specifications were found to be generally conservative, whereas the CSM offered improved design capacities, owing to its allowance for strain hardening.
dc.publisherAmerican Society of Civil Engineers
dc.titleTesting and Design of Aluminum Alloy Cross Sections in Compression
dc.typeJournal Paper
dc.journal.volume140
dc.journal.issue9
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000972
dc.treeJournal of Structural Engineering:;2014:;Volume ( 140 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record