Show simple item record

dc.contributor.authorM. V. Anil Kumar
dc.contributor.authorV. Kalyanaraman
dc.date.accessioned2017-05-08T22:18:58Z
dc.date.available2017-05-08T22:18:58Z
dc.date.copyrightDecember 2014
dc.date.issued2014
dc.identifier.other40618247.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/77354
dc.description.abstractThe direct strength method (DSM) simplified the design of cold-formed steel (CFS) beams and columns compared with the traditional effective width method (EWM). In this paper, DSM equations for the distortional buckling (DB) strength are evaluated using the results of the experimental study on channel compression members with edge and intermediate stiffeners as well as nonlinear finite-element analysis (FEA) of the stiffened lipped channel compression members with various configurations, which fail after only DB. A total of 14 fixed-ended stiffened lipped channel compression members with intermediate stiffeners in both the web and flanges were tested, which failed after only DB. Further, additional data on the DB behavior is generated based on a parametric study using the nonlinear FEA, which was initially calibrated with the test data. A study on effect of parameters, such as the type of cross section, the dimensions of the cross section, the lip depth to flange width ratio (
dc.publisherAmerican Society of Civil Engineers
dc.titleDistortional Buckling of CFS Stiffened Lipped Channel Compression Members
dc.typeJournal Paper
dc.journal.volume140
dc.journal.issue12
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001027
dc.treeJournal of Structural Engineering:;2014:;Volume ( 140 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record