Show simple item record

dc.contributor.authorS. Kmet
dc.contributor.authorP. Platko
dc.date.accessioned2017-05-08T22:17:06Z
dc.date.available2017-05-08T22:17:06Z
dc.date.copyrightSeptember 2014
dc.date.issued2014
dc.identifier.other40091556.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/76225
dc.description.abstractThis paper describes a newly developed adaptive tensegrity module which has the ability to alter its geometrical form and prestress properties in order to adapt its behavior to current loading conditions. The novel adaptive structure and its connections create a new aspect which is presented in the paper. This system contains sensors that sense forces from the environment and an actuator that adjusts its shape accordingly, depending upon the load applied. The structure, in the form of an octahedral cell, consists of eight prestressed cables, four circumferential compressed struts and a central compressed strut which is designed to function as an actuator. Five types of tests were carried out, namely a prestressing test, a static loading test, and three adaptation tests. Tests confirmed the functionality of the developed adaptive system and the applicability of the proposed equipment, software, computational models, and control commands. Responses of the structure obtained analytically and numerically are compared with experimental results. The results demonstrate that the experimentally obtained behavior of the adaptive tensegrity system can be theoretically predicted.
dc.publisherAmerican Society of Civil Engineers
dc.titleAdaptive Tensegrity Module. II: Tests and Comparison of Results
dc.typeJournal Paper
dc.journal.volume140
dc.journal.issue9
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000958
dc.treeJournal of Structural Engineering:;2014:;Volume ( 140 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record