Show simple item record

dc.contributor.authorXiao-Ling Zhao
dc.contributor.authorGregory J. Hancock
dc.contributor.authorNicholas S. Trahair
dc.date.accessioned2017-05-08T22:16:28Z
dc.date.available2017-05-08T22:16:28Z
dc.date.copyrightNovember 1995
dc.date.issued1995
dc.identifier.other40053884.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/75847
dc.description.abstractIn this paper, tests on the lateral buckling of cold-formed rectangular hollow sections (RHS) beams under uniform bending moment are described. The section size chosen for testing is 75 × 25 × 2.5 mm, which is the largest depth/width ratio manufactured in Australia. The beam spans varied from 2,000 to 7,000 mm to produce a large range of beam-slenderness ratios. Carefully designed loading and support systems were used in the tests to apply gravity load through the centroid of the section and to ensure that simply supported end conditions were achieved. The test results are compared with existing design models and standards. An improved design rule is given for the lateral buckling of cold-formed RHS beams.
dc.publisherAmerican Society of Civil Engineers
dc.titleLateral-Buckling Tests of Cold-Formed RHS Beams
dc.typeJournal Paper
dc.journal.volume121
dc.journal.issue11
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)0733-9445(1995)121:11(1565)
dc.treeJournal of Structural Engineering:;1995:;Volume ( 121 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record