Show simple item record

dc.contributor.authorCaihua Chen
dc.contributor.authorCuikun Wang
dc.contributor.authorHuizhong Sun
dc.date.accessioned2017-05-08T22:13:00Z
dc.date.available2017-05-08T22:13:00Z
dc.date.copyrightJune 2014
dc.date.issued2014
dc.identifier.other39873307.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/73900
dc.description.abstractWith the rapid development of high-rise buildings in China, the steel-concrete composite structure is widely used because of its excellent seismic performance. So far, all of the high-rise buildings that rise more than 300 m in China are of a steel-concrete composite structure, which are designed based on Chinese codes. During the construction process, two main problems are encountered, as follows: (1) minimum stirrup ratio, and (2) embedded depth ratio for steel-concrete composite columns, which are strictly limited by Chinese codes. To solve those problems, 26 steel-concrete composite columns were tested under low cyclic reversed loading to simulate an earthquake load. By analyzing the failure patterns, hysteresis loops, skeleton curves, energy-dissipation capacity, and ductility of such specimens, the influence of the axial compression ratio, stirrup ratio, steel section shape, and steel embedded depth ratio on the seismic behavior of steel-concrete composite members are discussed. In accordance with the test results, the minimum stirrup ratio and embedded depth ratio for steel-concrete composite columns can be reduced relative to the limiting value given by Chinese codes. A formula for minimum stirrup ratio and a minimum embedded depth ratio for steel-concrete composite columns are recommended in accordance with an analysis of the test results.
dc.publisherAmerican Society of Civil Engineers
dc.titleExperimental Study on Seismic Behavior of Full Encased Steel-Concrete Composite Columns
dc.typeJournal Paper
dc.journal.volume140
dc.journal.issue6
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000951
dc.treeJournal of Structural Engineering:;2014:;Volume ( 140 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record