Show simple item record

dc.contributor.authorRichard L. Wood
dc.contributor.authorTara C. Hutchinson
dc.date.accessioned2017-05-08T22:12:41Z
dc.date.available2017-05-08T22:12:41Z
dc.date.copyrightJune 2014
dc.date.issued2014
dc.identifier.other39862494.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/73712
dc.description.abstractUsing data generated from experiments, a numerical model is developed for capturing the in-plane seismic response of full-height cold-formed steel framed partition walls. The behavior of the partition wall is captured using a lumped nonlinear material model localized within a zero-length spring. The lumped material is developed with a pinching material used in a parallel configuration within the Open System for Earthquake Engineering Simulation (OpenSees) modeling platform. A simple, lumped model is utilized to facilitate ease of implementation in beam-column type finite element analyses commonly adopted in design of building structures. Importantly, its characteristics are determined by analyzing a large suite of experimental data on institutional and commercial type metal stud walls. Two error metrics based on calculation of the maximum force and half-cycle hysteretic energy are introduced to assess the model’s robustness. The model’s predictive capabilities are demonstrated via simulation of individual walls. In particular, for a fully-connected partition wall, a normalized mean model is shown to capture the experimental hysteretic behavior with a high level of accuracy.
dc.publisherAmerican Society of Civil Engineers
dc.titleDesign-Oriented Model for Capturing the In-Plane Seismic Response of Partition Walls
dc.typeJournal Paper
dc.journal.volume140
dc.journal.issue6
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000899
dc.treeJournal of Structural Engineering:;2014:;Volume ( 140 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record