Show simple item record

dc.contributor.authorJ. Hua
dc.contributor.authorT. White
dc.date.accessioned2017-05-08T22:12:38Z
dc.date.available2017-05-08T22:12:38Z
dc.date.copyrightJuly 2002
dc.date.issued2002
dc.identifier.other39861377.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/73683
dc.description.abstractThe Indiana Department of Transportation/Purdue University accelerated pavement testing (APT) facility has been utilized in a number of studies of hot mix asphalt (HMA) rutting performance. The benefit of using APT is that rutting performance can be established in a few days of testing. Finite element (FE) models have been developed for relating APT to in‐service pavement performance. Factors addressed in the models include pavement geometry, boundary conditions, materials, loads, test conditions, and construction variables. Determining the effects of these factors provides a means for better interpreting APT test results and HMA rutting performance. A detailed analysis using 3D and 2D FE has been made of tire/pavement contact pressure effects on rutting. The analyses include tread pattern and constant and varying contact pressure. A creep model is used to represent the HMA time‐dependent material behavior. Based on test data, the material constants in the creep model were back calculated. Results of the FE studies show that the creep model can successfully characterize pavement material behavior through a reasonable approximation of loading and other factors.
dc.publisherAmerican Society of Civil Engineers
dc.titleA Study of Nonlinear Tire Contact Pressure Effects on HMA Rutting
dc.typeJournal Paper
dc.journal.volume2
dc.journal.issue3
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)1532-3641(2002)2:3(353)
dc.treeInternational Journal of Geomechanics:;2002:;Volume ( 002 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record