Show simple item record

dc.contributor.authorErik Stefan Bernard
dc.contributor.authorRussell Q. Bridge
dc.contributor.authorGregory J. Hancock
dc.date.accessioned2017-05-08T22:12:26Z
dc.date.available2017-05-08T22:12:26Z
dc.date.copyrightAugust 1993
dc.date.issued1993
dc.identifier.other39853346.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/73604
dc.description.abstractThe size and position of intermediate stiffeners in the compression flanges of thin‐walled profiled steel decks exert a strong influence on the dominant buckling mode of the flange. The ability of the deck to provide both high load‐carrying capacity before the onset of elastic buckling and a high ultimate‐load capacity may therefore be affected. A program of tests to determine the effectiveness of intermediate stiffeners in controlling buckling modes is undertaken. A series of specimens are loaded in pure bending resulting in various buckling waveforms prior to ultimate failure through a plastic collapse mechanism. The experimentally determined buckling stresses are found to be comparable with studies performed using a finite‐strip numerical analysis in which both local, and distortional buckling modes are predicted. A simplified design procedure for distortional buckling is proposed. The existing design procedure for local buckling in the Australian Standard AS1538‐1988 is confirmed.
dc.publisherAmerican Society of Civil Engineers
dc.titleTests of Profiled Steel Decks with V‐Stiffeners
dc.typeJournal Paper
dc.journal.volume119
dc.journal.issue8
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)0733-9445(1993)119:8(2277)
dc.treeJournal of Structural Engineering:;1993:;Volume ( 119 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record