| dc.contributor.author | Falagush | |
| dc.contributor.author | G. R. | |
| dc.contributor.author | McDowell | |
| dc.contributor.author | Hai-Sui | |
| dc.contributor.author | Yu | |
| dc.date.accessioned | 2017-05-08T22:11:23Z | |
| dc.date.available | 2017-05-08T22:11:23Z | |
| dc.date.copyright | December 2015 | |
| dc.date.issued | 2015 | |
| dc.identifier.other | 38307933.pdf | |
| dc.identifier.uri | http://yetl.yabesh.ir/yetl/handle/yetl/73121 | |
| dc.description.abstract | The effect of particle shape and particle crushing on the results of cone penetration testing (CPT) of granular materials in a calibration chamber has been studied using three-dimensional discrete element modeling. Simulating the whole chamber with a realistic particle size requires a large number of particles, which leads to a large computational time. Both 90° and 30° segments of a calibration chamber were used in this study to reduce computational time. The effect of particle shape was simulated by prohibiting particle rotation or using simple two-ball clumps. Prohibiting particle rotation was found to increase tip resistance significantly compared with free particle rotation, and replacing a single sphere with different shapes of simple two-ball clumps was also found to have an important effect on the tip resistance. Particle crushing was simulated during CPTs by replacing a broken particle with two new equal-sized smaller particles. The results showed that there was a considerable reduction in the tip resistance for the crushing model compared with the noncrushing model, and this reduction increased as the confining stress increased. | |
| dc.publisher | American Society of Civil Engineers | |
| dc.title | Discrete Element Modeling of Cone Penetration Tests Incorporating Particle Shape and Crushing | |
| dc.type | Journal Paper | |
| dc.journal.volume | 15 | |
| dc.journal.issue | 6 | |
| dc.journal.title | International Journal of Geomechanics | |
| dc.identifier.doi | 10.1061/(ASCE)GM.1943-5622.0000463 | |
| dc.tree | International Journal of Geomechanics:;2015:;Volume ( 015 ):;issue: 006 | |
| dc.contenttype | Fulltext | |