Show simple item record

dc.contributor.authorDongzhou Huang
dc.contributor.authorTon‐Lo Wang
dc.contributor.authorMohsen Shahawy
dc.date.accessioned2017-05-08T22:11:06Z
dc.date.available2017-05-08T22:11:06Z
dc.date.copyrightAugust 1993
dc.date.issued1993
dc.identifier.other37526472.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/73035
dc.description.abstractThe impact behavior of multiple vehicles moving across rough bridge decks on seven multigirder concrete bridges with different span lengths is studied. The bridges are modeled as grillage beam systems. The vehicle is simulated as a nonlinear vehicle model with 12 degrees of freedom according to the HS20‐44 truck design loading in American Association of State Highway and Transportation Officials (AASHTO) specifications. Four classes of road‐surface roughness generated from the power‐spectral‐density function for the approach roadways and bridge decks are used in the analysis. The parametric analysis shows that the impact of exterior girders of short‐span bridges is highly sensitive to such factors as lateral loading position, vehicle weight, road roughness, number of loading lanes, and lateral stiffness. The maximum impact factors of girders were obtained for three trucks (side by side) through changing their transverse positions, with different speeds and road‐surface roughnesses. The results are useful for bridge design and further study of the impact formula proposed by the AASHTO specifications.
dc.publisherAmerican Society of Civil Engineers
dc.titleImpact Studies of Multigirder Concrete Bridges
dc.typeJournal Paper
dc.journal.volume119
dc.journal.issue8
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)0733-9445(1993)119:8(2387)
dc.treeJournal of Structural Engineering:;1993:;Volume ( 119 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record