Show simple item record

dc.contributor.authorTyler Sobieck
dc.contributor.authorRebecca A. Atadero
dc.contributor.authorHussam N. Mahmoud
dc.date.accessioned2017-05-08T22:10:06Z
dc.date.available2017-05-08T22:10:06Z
dc.date.copyrightOctober 2015
dc.date.issued2015
dc.identifier.other36772426.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/72706
dc.description.abstractThis paper presents the results of an experimental study on the fatigue performance of RC beams strengthened with different externally bonded carbon fiber-reinforced polymer (CFRP) systems. Seven specimens were fabricated; three had no CFRP, while the remaining four had one of two CFRP systems. The objective of the research reported in this paper was to determine the effect the CFRP repair had on the growth rate of a fatigue crack initiating from a notch in the tensile rebars. The steel reinforcement was selected for focus because similar studies have found this reinforcement to be the limiting fatigue component in RC beams. The experimental results reported in this paper showed an extended fatigue life and a slowed crack growth rate in specimens repaired with both CFRP systems. The crack growth rates were used to determine material constants for the Paris law, which describes growth of a stable fatigue crack. These results are then used to propose recommendations for design of CFRP repair systems for a specific fatigue life.
dc.publisherAmerican Society of Civil Engineers
dc.titleFatigue Crack Propagation of Notched Steel Rebar in RC Beams Repaired with Externally Bonded CFRP
dc.typeJournal Paper
dc.journal.volume19
dc.journal.issue5
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)CC.1943-5614.0000541
dc.treeJournal of Composites for Construction:;2015:;Volume ( 019 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record