Show simple item record

dc.contributor.authorRussell P. Burrell
dc.contributor.authorHassan Aoude
dc.contributor.authorMurat Saatcioglu
dc.date.accessioned2017-05-08T22:08:57Z
dc.date.available2017-05-08T22:08:57Z
dc.date.copyrightSeptember 2015
dc.date.issued2015
dc.identifier.other34007790.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/72339
dc.description.abstractResearch has shown that the addition of steel fibers to concrete results in improved postcracking tensile capacity leading to enhanced toughness, ductility, and damage tolerance. These performance enhancements make steel fiber-reinforced concrete (SFRC) an ideal material for use in the blast-resistant design of structures. Research in the literature is conflicting on the performance of SFRC at high strain rates. There is also very limited research on the performance of SFRC structural components under blast loads. This paper presents the results of a research program investigating the blast performance of reinforced concrete and steel fiber-reinforced concrete columns. In the experimental program half-scale columns were constructed and exposed to different simulated blast pressure–impulse combinations using the state-of-the art shock-tube testing facility at the University of Ottawa. The test parameters included transverse reinforcement spacing (nonseismic and seismic detailing) as well as steel fiber content (0 to 1.5% by volume of concrete). The results show that SFRC improves the blast performance of columns in terms of maximum and residual displacements as well as damage tolerance and elimination of secondary blast fragments. Furthermore, the results demonstrate that the use of seismic detailing improves blast performance. Finally, the paper examines the suitability of using single-degree-of-freedom (SDOF) analysis to predict the blast response of the SFRC columns tested in the research program.
dc.publisherAmerican Society of Civil Engineers
dc.titleResponse of SFRC Columns under Blast Loads
dc.typeJournal Paper
dc.journal.volume141
dc.journal.issue9
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001186
dc.treeJournal of Structural Engineering:;2015:;Volume ( 141 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record