Show simple item record

dc.contributor.authorTian-Yi Song
dc.contributor.authorLin-Hai Han
dc.contributor.authorZhong Tao
dc.date.accessioned2017-05-08T22:08:51Z
dc.date.available2017-05-08T22:08:51Z
dc.date.copyrightSeptember 2015
dc.date.issued2015
dc.identifier.other33658169.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/72311
dc.description.abstractThis paper presents the test results of three steel-reinforced concrete (SRC) columns to SRC beam joints under combined loading and fire. Simulated fires, including heating and cooling phases with different heating times, were applied to the lower part of the three composite joint specimens. Failure modes, concrete cracking, concrete spalling, and deformation development were observed or measured. The test results indicate that heating time affects the postfire residual bearing capacity significantly. A finite-element analysis (FEA) model was developed to simulate the response of SRC beam-to-column joints in whole loading sequences, including initial loading, heating, cooling, and postfire loading. Some key influencing factors, such as the creep of steel at high temperatures, slippage between the steel and concrete, and residual stresses in the H-shaped steel, were considered in the model. On the basis of the verified FEA model, the development of the rotation angle between the beam and column, which cannot be measured by testing, was calculated and discussed.
dc.publisherAmerican Society of Civil Engineers
dc.titleStructural Behavior of SRC Beam-to-Column Joints Subjected to Simulated Fire Including Cooling Phase
dc.typeJournal Paper
dc.journal.volume141
dc.journal.issue9
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001211
dc.treeJournal of Structural Engineering:;2015:;Volume ( 141 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record