Show simple item record

dc.contributor.authorLin-Hai Han
dc.contributor.authorQing-Hua Tan
dc.contributor.authorTian-Yi Song
dc.date.accessioned2017-05-08T22:08:49Z
dc.date.available2017-05-08T22:08:49Z
dc.date.copyrightApril 2015
dc.date.issued2015
dc.identifier.other33486042.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/72290
dc.description.abstractPerformance of steel reinforced concrete (SRC) columns under fire is investigated in this paper. A three-dimensional finite-element analysis (FEA) modeling is developed for sequentially coupled heat transfer and structural analysis, in which the classical creep strain and the transient strain of concrete together with thermal strain are included explicitly by subroutines. Four SRC columns with H-shaped steel and cross-shaped steel are experimentally investigated, and the test results are adopted to verify the FEA modeling. The FEA modeling is then used to construct the model of a typical full-scale SRC column and perform analysis to the behavior of the column in fire. Extensive parametric studies are performed to investigate the fire resistance of the SRC column, and the key influencing parameters are identified. Finally, a simplified calculation method is proposed to predict the fire resistance of the SRC column.
dc.publisherAmerican Society of Civil Engineers
dc.titleFire Performance of Steel Reinforced Concrete Columns
dc.typeJournal Paper
dc.journal.volume141
dc.journal.issue4
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001081
dc.treeJournal of Structural Engineering:;2015:;Volume ( 141 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record