Show simple item record

dc.contributor.authorCheng-Cheng Zhang
dc.contributor.authorHong-Hu Zhu
dc.contributor.authorBin Shi
dc.contributor.authorFang-Dong Wu
dc.contributor.authorJian-Hua Yin
dc.date.accessioned2017-05-08T22:08:18Z
dc.date.available2017-05-08T22:08:18Z
dc.date.copyrightJune 2015
dc.date.issued2015
dc.identifier.other31855195.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/72101
dc.description.abstractFiber-reinforced polymer (FRP) bars and strips are potential alternatives to conventional soil reinforcements. In this aspect, two commonly used FRP materials are glass-FRP and carbon-FRP (GFRP and CFRP). However, the differences in pullout behavior between soil-embedded GFRP and CFRP rods, and conventional steel bars, are not well understood. This paper describes the results of an experimental study that was conducted to investigate the behavior of FRP bar/strip-sand interfaces under low normal pressure. A series of pullout tests were performed on GFRP and CFRP bars and strips buried in sand. A simple model using the ideal elastoplastic interface shear stress-strain relationship is proposed to simulate the pullout behavior of the FRP reinforcements. The progressive pullout process and the evolution of interface shear stress distribution are obtained from the proposed model. The experimental and analytical results show that, in comparison with CFRP and steel reinforcements, the GFRP reinforcement has a more nonlinear and nonuniform distribution of interface shear stress, and the pullout is more progressive. The differences in Young’s modulus and interface shear coefficient lead to the different pullout behaviors of these three materials. The reduced Young’s modulus gives GFRP reinforcements a risk of excessive tensile elongation and bending deflection. The test results show that the progressive pullout behavior is also governed by the reinforcement dimensions.
dc.publisherAmerican Society of Civil Engineers
dc.titleExperimental Investigation of Pullout Behavior of Fiber-Reinforced Polymer Reinforcements in Sand
dc.typeJournal Paper
dc.journal.volume19
dc.journal.issue3
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)CC.1943-5614.0000526
dc.treeJournal of Composites for Construction:;2015:;Volume ( 019 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record